更新时间：2022-04-08
文章来源：https://www.wenguangzhineng.com/
阅读量：22
智能会议系统现在广泛应用于企业中，但是不乏对其操作方面不了解的，容易出现一些问题，那么智能会议系统会有什么故障要预防？下面我们一起来看看吧。
Intelligent conference system is now widely used in enterprises, but there is no lack of understanding of its operation, which is prone to some problems. Then what faults should be prevented in intelligent conference system? Let's take a look.
智能会议系统音响系统喇叭出现杂音或啸叫：麦克电池电量不足或功放音量调得过大容易产生杂音，建议用户先更换麦克电池或适当降低功放的音量。麦克离喇叭过近或正对喇叭容易产生啸叫，请调整麦克与喇叭之间的距离和角度；功放音量过大也会产生啸叫，可调低功放音量试试。
The speaker of the intelligent meeting system is noisy or squeals: The battery of the microphone is low or the volume of the power amplifier is too high. Replace the battery of the microphone or lower the volume of the power amplifier. If the microphone is too close to the speaker or directly facing the speaker, it is easy to scream. Please adjust the distance and Angle between the microphone and the speaker. The result amplifier volume is too big also can produce scream, can lower the result amplifier volume to try.
智能会议系统音响系统麦克无声：检查麦克电池是否没电了；无线麦克接收机是否加电；接收机与调音台之间的连线是否连接或松动。
Intelligent conference system Sound system Mike silent: check whether the battery of the mike is dead; Whether the wireless microphone receiver is powered up; Whether the cable between the receiver and the mixer is connected or loose.
智能会议系统音响系统喇叭不响：检查功放是否开机或为其供电的插座是否加电。用户往往在关闭系统时将设备的电源也一起关闭。假如功放打开了，检查是否将系统静音，或将功放播放的音量调得太低，以于喇叭无声或播放的音量小。如功放打开了，音量也调了，喇叭仍无声音，则检查调音台是否电源关闭。
Intelligent conference system The speaker of the audio system does not sound: Check whether the power amplifier is turned on or whether the socket that supplies power to it is powered on. Users often turn off the power of the device when shutting down the system. If the amplifier is turned on, check whether the system is muted, or the volume of the amplifier is set too low, so that the speaker is silent or the volume of the amplifier is low. If the power amplifier is turned on and the volume is adjusted, but the speaker still has no sound, check whether the mixer is powered off.
灯光照明控制系统无法开启照明或无法关闭照明灯：KT-8继电器内的模块不吸合或不断开。如果只是偶尔出现该现象，那么可以轻微敲击继电器内的模块使其吸合或断开。如果经常出现，则通知维护人员到现场检查。
The lighting control system cannot turn on the lighting or turn off the lighting: the module in the KT-8 relay does not close or keeps turning on. If this happens only occasionally, the module in the relay can be gently tapped to pull or disconnect it. If it occurs frequently, inform maintenance personnel to check it on site.
灯光照明控制系统无法调节照明灯的亮度：智能会议系统中的灯光照明控制系统无法调节照明灯的亮度，通知维护人员到现场检查。
The lighting control system fails to adjust the brightness of the floodlights: The lighting control system in the intelligent meeting system fails to adjust the brightness of the floodlights. Therefore, maintenance personnel are notified to check the floodlights onsite.
What failures should be prevented in the intelligent meeting system? In fact, in addition to the above problems, there are many aspects to prevent, if you feel that you can not solve, to find professional maintenance personnel to repair as soon as possible. For more information, please visit our website www.wenguangzhineng.com for consultation.
鲁公网安备 37010202002516号
